For the home
Calla lily vase
Two leaves cross low on the body and one keeps rising, closing over the mouth into a pointed hood.
Personalisation available
Loading
Services
Pieces for restaurants, bars and hotels
The objects a guest actually touches — the service piece, the holder on the table, the amenity in the room. Designed for how your room works, and produced in the quantity it repeats.
The problem this solves
A dining room is designed down to the lighting and then set with objects from a restaurant supply catalogue that every other room also uses. The pieces a guest picks up are the ones they remember by touch, and they are usually the only part of the room nobody designed.
Table and service pieces
Holders, stands, trays and presentation pieces shaped around how a course is actually brought and set down.
Bottle and bar presentation
A reserve bottle deserves more than a shelf. Cradles and presentation pieces designed for the moment of service rather than for storage.
Rooms and amenity sets
Vanity trays, amenity holders and small fittings for guest rooms, made as a consistent set across every room.
What the studio does
- Design around the service
- How a piece is picked up, carried, set down, cleaned and stacked decides its shape. That is a conversation about your service, not a catalogue choice.
- Be specific about contact
- Where a piece meets food, drink or heat we design the contact against a purchased glass, ceramic or stainless insert — which is the honest solution rather than a claim about the polymer.
- Produce the set consistently
- A service set has to match across a room and survive being replaced piece by piece. It is produced as a batch against an approved sample, and the model is kept for the next order.
What to send us
How the service works matters more than a specification. Tell us what happens at the table and the piece follows from that.
- Photographs of the room, the table setting or the bar
- What the piece has to hold, and how it is carried
- How many, and how often they are replaced
- Anything already in the room the piece has to sit beside
One table, or the whole floor
A single piece
One presentation piece for one bottle, one signature dish, one moment in the service. Designed for it and made once.
A set across the room
The same piece for every table, every room or every bar station, produced consistently and replaceable one at a time later from the same model.
Materials and finish
- Premium polymer
- Designed and produced by the studio in polymer selected for the use, not for appearance alone.
- Matte, low-sheen surface
- Finished to avoid a glossy plastic look and to keep fingerprints from reading.
- Purchased components
- Any glass, stainless steel, candle or fastener in this design is a bought-in part integrated into it — the studio does not produce metal.
Parts designed and produced by the studio are premium polymer. Any metal or glass elements are purchased components integrated into the design.
How it usually goes
- 01
Describe the service
What is served, how it reaches the table, and what is wrong with what you use now.
- 02
Design and prototype
A physical piece to be handled by the people who will actually carry it, before a set exists. Service reveals problems a drawing does not.
- 03
Approve a sample
One finished piece, used in the room, approved before the run.
- 04
Produce and deliver
Made, finished, inspected and delivered, with the model kept for replacements and repeat orders.
Where we work
Designed and produced in Italy, for venues here and elsewhere in Europe. Delivery within mainland Italy is included up to €10 of carriage per order; the islands, the rest of Europe and larger consignments are quoted with your confirmation before you approve anything.
Related
For the home
Goccia teardrop vase
A closed drop with a fine grain over the whole wall and a small round mouth cut straight into the shoulder.
Personalisation available
For the home
Corrente spiral vase
A column cut with slow diagonal ridges, closed at the lip by a band of gold printed into the wall.
Personalisation available
Where to go next
- For businessPresentation systems, operational solutions, proprietary product development, prototypes and limited production runs, developed around the outcome you need.
- Custom designSend a sketch, a photo, a voice note or just the problem. ISPIRENZA clarifies, designs, tests and produces bespoke pieces. Free first assessment.
- CollectionBrowse ISPIRENZA designs by category and use. Every piece can be adapted in size, colour, finish and personalisation.
Tell us how the room works
What is served, how it reaches the table, and how many you need. That is where the design starts.
What happens next
We review what you sent
Your description, photos, files and voice note are read by a person, not sorted by a form.
We ask if something is missing
If a dimension, a use or a deadline changes the answer, we come back with a short question.
You receive a clear reply
Feasibility, the route we recommend, and what we still need in order to price the work.
Production starts after you approve
Only once the design, the details and the terms are agreed does anything get made.
We normally reply within Within 24 hours.
Before you send anything
The first assessment is free
We look at what you send and tell you honestly whether it can be made, and how.
Treated confidentially
Files, drawings and project details stay between us. Nothing is published without your agreement.
No commitment
Sharing an idea does not oblige you to anything. You can stop at any point.
Paid production only after approval
Nothing is produced or invoiced until you have approved the route, the details and the price.
Your project
Start with the thing itself. Rough is fine — describe it, say it out loud, or show us a photo.
A few lines is enough. Describe the problem if the piece is not clear yet.
0 of 1200
Voice note(optional)
Often the fastest way to explain an idea. Stored privately and never published.
Recording stops automatically after 3 minutes.
Photos, sketches or files(optional)
Drag files here, or
Images, PDFs and 3D files. Up to 4 files, 4 MB each.
When it has to exist
A real date changes what we can promise, so it is worth answering honestly.
How many?
How to reply
We normally reply within Within 24 hours.
Parts we design and produce are made in polymer. Glass, metal, candles, electronics and hardware can be built into a piece as purchased components.
Questions people ask first
Are these safe for food and drink?
Tell us the actual contact and we will answer specifically rather than generally. Many pieces are designed so contact happens against a purchased glass, ceramic or stainless insert, which is usually the honest solution rather than a claim about the polymer itself.
Can they go in a commercial dishwasher?
A commercial cycle is hot enough to matter, so this is a design decision rather than an afterthought. Tell us how the piece will be washed and we will specify accordingly, or design the washable part as a removable insert.
What about candles and heat?
Polymer and open flame do not belong together, and we will say so rather than sell you a candle holder that is one. Where a piece involves flame the contact is designed against a purchased glass or metal component.
Can we replace one piece later?
Yes. The approved model is kept, so a single replacement years later matches the set rather than approximating it.