Loading
Services
Displays and fittings made for one shop, not for every shop
A plinth cut to the counter it stands on, a holder shaped around the product it presents, a wall system that fits the alcove that is actually there. Made in the quantity your locations repeat.
The problem this solves
Shop fittings are sold as a catalogue of sizes, and a shop is not a catalogue of sizes. A display bought off the shelf is either too big for the counter, wrong for the product, or identical to the one in the shop across the street — and the piece that presents a premium product should not be the cheapest thing on the table.
Product plinths and stands
A single product presented properly: sized to the counter, weighted to stay put, and shaped so the eye goes to the object rather than to the holder.
Point-of-sale and counter pieces
Brochure holders, sample trays, price and information holders that match the room instead of interrupting it.
Wall and shelf systems
Fittings designed around the space that exists — the alcove, the shelf depth, the fixing points already in the wall.
What the studio does
- Design around the actual space
- The measurements of the counter and the product come first, so the piece fits the place it is going rather than a standard size it was drawn to.
- Carry the mark where it belongs
- A logo or a name can be part of the form rather than a sticker on it — printed into the surface, cut through it, or picked out in a second colour.
- Produce the set consistently
- Where the same piece goes to several locations it is produced as a batch, checked against an approved sample so every branch gets the same object.
What to send us
A photograph of the space with something recognisable in it for scale answers more questions than a paragraph of description.
- Photographs of the space, and of the product it has to hold
- The dimensions that constrain it: counter depth, shelf height, alcove width
- How many locations, and whether they are identical
- Any brand material — a logo file, a colour reference, an existing fitting
One counter, or every branch
A single piece
One window, one counter, one product launch. Designed for the space it is going into and made once.
A set across locations
The same piece produced for every branch, stand or seasonal rotation, with consistent dimensions and finishing across the set. The design stays available for a repeat run later without re-tooling.
Materials and finish
- Premium polymer
- Designed and produced by the studio in polymer selected for the use, not for appearance alone.
- Matte, low-sheen surface
- Finished to avoid a glossy plastic look and to keep fingerprints from reading.
- Purchased components
- Any glass, stainless steel, candle or fastener in this design is a bought-in part integrated into it — the studio does not produce metal.
Parts designed and produced by the studio are premium polymer. Any metal or glass elements are purchased components integrated into the design.
How it usually goes
- 01
Send the space and the product
Photographs, dimensions and the number of locations. We tell you what is straightforward and what is not.
- 02
Design and prototype
A physical prototype for anything that has to hold, balance or fit — because a display that tips is discovered in a shop, not in a render.
- 03
Approve a sample
One finished piece, approved by you, before the set is produced. It becomes the reference the batch is checked against.
- 04
Produce and deliver
Made, finished, inspected and sent — to one address or to several.
Where we work
Designed and produced in Italy, and delivered to a shop, a distributor or a fit-out contractor. Delivery within mainland Italy is included up to €10 of carriage per order; the islands, the rest of Europe and bulkier consignments are quoted with your confirmation.
Where to go next
- For businessPresentation systems, operational solutions, proprietary product development, prototypes and limited production runs, developed around the outcome you need.
- Custom designSend a sketch, a photo, a voice note or just the problem. ISPIRENZA clarifies, designs, tests and produces bespoke pieces. Free first assessment.
- CollectionBrowse ISPIRENZA designs by category and use. Every piece can be adapted in size, colour, finish and personalisation.
Show us the space
A photograph of the counter and the product, and how many you would need. That is enough to start.
What happens next
We review what you sent
Your description, photos, files and voice note are read by a person, not sorted by a form.
We ask if something is missing
If a dimension, a use or a deadline changes the answer, we come back with a short question.
You receive a clear reply
Feasibility, the route we recommend, and what we still need in order to price the work.
Production starts after you approve
Only once the design, the details and the terms are agreed does anything get made.
We normally reply within Within 24 hours.
Before you send anything
The first assessment is free
We look at what you send and tell you honestly whether it can be made, and how.
Treated confidentially
Files, drawings and project details stay between us. Nothing is published without your agreement.
No commitment
Sharing an idea does not oblige you to anything. You can stop at any point.
Paid production only after approval
Nothing is produced or invoiced until you have approved the route, the details and the price.
Your project
Start with the thing itself. Rough is fine — describe it, say it out loud, or show us a photo.
A few lines is enough. Describe the problem if the piece is not clear yet.
0 of 1200
Voice note(optional)
Often the fastest way to explain an idea. Stored privately and never published.
Recording stops automatically after 3 minutes.
Photos, sketches or files(optional)
Drag files here, or
Images, PDFs and 3D files. Up to 4 files, 4 MB each.
When it has to exist
A real date changes what we can promise, so it is worth answering honestly.
How many?
How to reply
We normally reply within Within 24 hours.
Parts we design and produce are made in polymer. Glass, metal, candles, electronics and hardware can be built into a piece as purchased components.
Questions people ask first
Can you match our brand colours?
Approximately, and we will be straight about the difference. Pieces are produced in the colours the studio actually stocks, so an exact match to a printed brand colour is a conversation rather than a promise — send the reference and we will tell you how close we can get.
Can the logo be part of the piece?
Yes. It can be printed into the surface, cut through it or picked out in a second colour as part of the form, rather than applied afterwards as a label.
How heavy are they? Will they stay put?
Weight and stability are designed in, and a piece that has to resist being knocked is prototyped before the run. Tell us what it holds and where it stands.
Can we order more later?
Yes. The approved model is kept, so a second location or a replacement starts from the same design rather than a new one.