For the home
Tree house vase
A hollow trunk with a small door and a window, the grain running the full height and deep enough to feel.
Personalisation available
Loading
Specifications
Dimensions
192 mm × 192 mm × 158.36 mm
One size: 192 mm across the base, 158.36 mm high. The stepped seat takes bottles of 75, 95 or 110 mm diameter.
Materials and finish
- Premium polymer — Designed and produced by the studio in polymer selected for the use, not for appearance alone.
- Matte, low-sheen surface — Finished to avoid a glossy plastic look and to keep fingerprints from reading.
Made for
A dining table, a kitchen counter, a tasting room or a shop shelf, indoors — presenting one 75 cl bottle, full or empty, as the centre of the setting.
Production and delivery
Made to order
Made in 2–5 working days from confirmation.
Delivery is on us within mainland Italy, up to €10 of carriage per order. Everything past that is quoted rather than assumed.
Provenance
Designed by ISPIRENZA in Italy, 2026
Produced in Italy
Use and care
- Indoors — Prolonged sun and frost change the material. This piece is made for indoors; an outdoor version can be produced in a different polymer, which is a design conversation rather than a substitution.
- What it will carry — Designed for a stated load and not as a step, a seat or a structural fixing. Where a piece is mounted, the fixing is specified for the wall it goes on and installed accordingly.
Save this page for later
Scan to return to this design on your phone.
Anfiteatro wine bottle display
per item
€199Three rings step down to a seat cut for the three diameters a 75 cl bottle comes in — 75, 95 and 110 mm — so a Bordeaux, a Burgundy and a sparkling bottle each stand level instead of one of them rocking on a ring meant for another. A ramp climbs the outside the way a road climbs a hill; beneath it an arcade carries vines, cypresses, a barrel and a farmhouse in relief. 192 mm across, 158 mm high, matte polymer, and the band under the arches is where a name goes.
Quantity
One design, different uses
01 / 01
Dining table
Set out for a meal, where the piece is part of the evening rather than decoration.
Make this one yours
Tell us what should change about it — a name, a logo, a size, a colour — and we come back with a price and a date before anything is made.
How personalisation works
Send the brief
The change you describe, your dates and any reference file come to us with the design you were looking at.
We quote it
We check what the change involves, then send the price, the lead time and a proof of anything to be applied to the piece.
You approve, we make it
Nothing is produced until you have approved the proof and the total.
We normally reply within Within 24 hours.
When it has to exist
A real date changes what we can promise, so it is worth answering honestly.
What changes
Start with the closest suggestions, then tell us the part only you know.
The wording exactly as it should read, where it goes, what it is for. A voice note or a file counts instead of typing.
0 of 1200
Voice note(optional)
Recording stops automatically after 3 minutes.
Reference file(optional)
A logo, a sketch, a photograph of the thing it has to fit. PDF or image; a vector prints cleanest.
Drag files here, or
Images, PDFs and 3D files. Up to 4 files, 4 MB each.
How many with this change?
Parts we design and produce are made in polymer. Glass, metal, candles, electronics and hardware can be built into a piece as purchased components.
You might also like
For the home
Corrente spiral vase
A column cut with slow diagonal ridges, closed at the lip by a band of gold printed into the wall.
Personalisation available
For the home
Ramo sculptural jewellery tree and valet tray
An organic branch rising from a dual-lobed tray, designed to hold rings, chains and daily pieces without clutter.
Personalisation available
